PG2A – Centrifugal Dewatering Pump 2″ – Petrol
Clear clean water from your job site or swimming pool quickly with the PG 2 dewatering pump. This simple, easy to use pump is designed to move water up to 158 gpm (600 L/min) with very little solids, up to 0.25-inch (6.5 mm). With its self-priming centrifugal pumping action and overall compact size, the pump is ideal for the contractor with the need for temporary water removal.
– Cast iron impeller and volute are wear resistant for long life and minimal service.
– Pump out vanes on back of impeller reduce debris accumulation and downtime while allowing greater productivity.
– Carbon ceramic mechanical seal teamed with reliable four-cycle engine with low oil shutdown provides for increased operating life.
– High strength lightweight die cast aluminum housing increases the years of trouble-free pump life. A heavy duty protective frame provides convenient carrying handles while adding extra protection for the pump.
|Dimensions (L x W x H)||481 x 377 x 394 mm|
|Diameter suction and discharge||50 mm|
|Operating weight||25 kg|
|Discharge head||27 m|
|Discharge capacity||639 L/min|
|Suction height lift||7.6 m|
|Solids diameter max. size||6.5 mm|
Engine / Motor
|Engine / Motor type||Air Cooled, Single Cylinder|
|Engine / Motor manufacturer||Honda|
|Engine / Motor model||GX120W1B4|
|Max engine speed||3,600 rpm|
|Operating speed||3,600 rpm|
|Power (max. rated)||2.6 kW|
|Power rating specification||SAE J1349|
|Engine oil capacity||0.6 L|
|Fuel consumption||1.3 L/h|
|Fuel tank capacity||2.5 L|
|Run time||1.9 hrs|